measurement
measurement preparation
· Always use the measurement tape· Write down the wide and the drop after the measurement, make sure that you do not reverse the width and drop since it will cause a big problem if you do so.· D’AZUR require the measurement in meter or millimeter
How to measure the plantation shutters for fitting inside the window frame1. Measure the width in three places, Top, Centre and Bottom.Measure from the inside opening edge of the recess to the opposite edge.Use the smallest of the three measurements.2. Measure the drop in three places, Left, Centre and Right.Measure from the top of the opening of the inside recess to the bottom of the inside sill.
outside mount measurement
How to measure the window (outside mount)1. Measure the width from one edge of the window to the opposite edge of the window.2. Measure the drop from the top of the window to where you want the blinds cover. We strongly recommend measuring minimum 10mm above the floor and 50-100mm below the window.3. D’AZUR encourages the customer to take past the edge of the window in order to have more privacy and better light control. The distance to add into the edge is fully optional to our dearest customer, but we recommend adding at least 60mm in order to have more privacy and better light control. Make sure there are not any barriers.
inside mount measurement
How to measure the window (inside mount)1. Measure the width from the inside of the window from left to the right. Make sure to measure the top of the reveal and not the bottom of the window.2. Measure the drop from the top of the inside sill to the bottom of the inside sill.Depth require: different blinds you want to do require different depth. For instance, the vertical blinds need the 135mm depth to fit in the 127 slat.
For further information about the measurement of the blind or the shutter, don’t hesitate to call 1300 788 139 or email to info@dazurshutters.com.au